Amazon Echo Plus

• Just Ask! Use your voice to control your QMotion Shades.
• Qmotion Shades now work with Amazon Echo Plus straight out of the box.
• Easy setup with QMotion ZigBee HA 1.2 and QIS shades (no extra hub or bridge needed).
• Control your shades with the Amazon Alexa App.
• Set routines such as timers and scenes

QZHub3

• Creates a Zigbee3.0 network for wireless control of QMotion battery and QIS wired shades
• Allows for stand-alone control of shades or integration with automation platforms
• Connected to Legrand cloud for future updates
• Power adapter and USB-C charging cable included
• Mobile control via QMotion QzHub app

QIS Power Panel

The Qadavanced Intelligent System offers three methods for Shade Control: 

• Hardwired: Uses standard Cat5e or Cat6 cable for both power and communication.
• ZigBee HA1.2: Uses standard Cat5e or Cat6 cable for power. Wireless communication via ZigBee HA1.2
• RS485 Communication: Uses standard Cat5e or Cat6 cable for both power and communication. 
• Communication Ports (RJ-45) - Quantity 2
• RJ-45 Ports for Motorized Shades and and switches - Quantity 8 
• Wall Mounted Switches receive power through Power Over Cable (POC)

Remote Controls

• Available as single channel or Multi Channel
• Each remote comes with 6 buttons to support Up, Down and preset positions 20%, 40%, 60%, 80%.
• All preset positions may be customized to your own requirements.
• The remote can control unlimited number of shades in a group with a range of 30’ to 50’.
• Up to 5 individual or group settings, unlimited number of shades per group.
• Zigbee HA1.2 remote can also operate your blinds via an Amazon Echo Plus without the need for voice control.

Qrelay

• In areas or sites where reception may not be the best, add a Qrelay to so that a signal reaches your blind.
• Use as many as you need; Unique design code technology ensures no cross interference between devices.
• Two modes of operation to suit your preferences.
• Echo mode repeats all valid QMotion remote commands.
• Plugin wherever you have an 240V outlet, or into a properly powered USB port.

Manual Control

• Slight tug, under half an inch, will send the shade to the next higher intermediate stop.
• Tug over 4-6 inches will lower the shade to where it stops.
• A tug of about 2 inches will send the shade to the upper position.

Range Extenders: ZigBee HA 1.2

• Used to create a ZigBee mesh network as the extender is paired into the system.
• Works with roller shades powered by QMotion ZigBee technology.
• Use as many as required in an installation (refer to limits when used with Qube).
• Please note - the original Range Extender may be used in a stand-alone installation, the RZ2 only works as an extender.

QIS Wire Adapter

• QMotion’s Wiring Adapter allows for pre-wired cabling to easily connect to QIS shades, resulting in simple and convenient access to roller shades powered by QIS motors without rewiring your entire system.
• This 6 inch adapter allows for the translation of communication and power without the added expense of proprietary cabling.